Afdichtingsrubber kofferklep 8.32; NU BESTELLEN

Alle onderdelen voor de body
Plaats reactie
Gebruikersavatar
Maarten-Jan
Site Admin
Berichten: 4561
Lid geworden op: 19 okt 2008, 00:01
Locatie: Zwolle
Contacteer:

Afdichtingsrubber kofferklep 8.32; NU BESTELLEN

Bericht door Maarten-Jan » 27 jan 2011, 12:21

Hierbij een bericht van een handige Thema liefhebber:

Dear 8:32 Driver
We do have many calls for the boot spoiler rubber of the 8:32. The 7 units
we had in stock were sold in no time and there were more requestes
thereafter.

We have contracted a South African firm to manufacture the rubber for us (
with felt and steel insert ), and are currently investigating viability of
production.

Pls. indicate if you would be interested in a copy, and what you would be
prepred to pay. Then we will see if we can generate enough sales volume to
warrant the production run.

You co-operation is most valued.

Kind Regards

Stuur een mail naar info@lanciathema.nl als je een dergelijk rubber wilt bestellen. Let op! Deze rubbers zijn niet meer te koop en als ze te koop zijn worden ze voor bedragen ruim over de 200 euro verkocht. Dit kan dus geen kwaad om op voorraad te hebben, zeker als je bedenkt hoeveel wateroverlast een uitgedroogd of kapot rubber geeft. Reageren graag per ommegaande!
Echt snelle auto's vallen stilstaand niet op!

Lancia Thema 8.32 SW

Gebruikersavatar
Maarten-Jan
Site Admin
Berichten: 4561
Lid geworden op: 19 okt 2008, 00:01
Locatie: Zwolle
Contacteer:

Re: Afdichtingsrubber kofferklep 8.32; NU BESTELLEN

Bericht door Maarten-Jan » 28 jan 2011, 00:03

Er is duidelijk interesse. We gaan voor een prijs tussen de 70 en 100 euro per stuk. Geef svp je bestelling door dan gaan we de Zuidafrikaan op de hoogte brengen wat onze wensen zijn.
Echt snelle auto's vallen stilstaand niet op!

Lancia Thema 8.32 SW

Gebruikersavatar
Maarten-Jan
Site Admin
Berichten: 4561
Lid geworden op: 19 okt 2008, 00:01
Locatie: Zwolle
Contacteer:

Re: Afdichtingsrubber kofferklep 8.32; NU BESTELLEN

Bericht door Maarten-Jan » 20 jun 2011, 12:40

Via Arrien had ik al een soort reactie binnen, nu ook via de officiele weg:

Good day.

We are finally making some headway with the spoiler rubber.
We have 2 options:
a) make the rubber as a running extrusion per meter. You would then have to
bend it around the corners, and seal the joint.
b) we can mould all 4 corners and make it in one piece like original.
the additional tooling cost for that would be around 600 euro.
We would like to know from you if you how strongly you feel about the
moulded corners.

You reply and patience is most appreciated.

Yours Sincerely
Felix Furtak B.Eng. (Hons.)



Nogal een dure grap om het op maat te laten buigen. Ik zal informeren naar de prijs zonder buigen.
Echt snelle auto's vallen stilstaand niet op!

Lancia Thema 8.32 SW

Gebruikersavatar
Maarten-Jan
Site Admin
Berichten: 4561
Lid geworden op: 19 okt 2008, 00:01
Locatie: Zwolle
Contacteer:

Re: Afdichtingsrubber kofferklep 8.32; NU BESTELLEN

Bericht door Maarten-Jan » 22 jun 2011, 20:22

Nog wat meer info; de prijs moet uiteindelijk uitkomen op € 100,- per stuk:

So far we don't have any prices. We are trying to establish the cost and the risk.

It is a once of cost to make the moulds, which I believe will be somewhere between E 1500 and E 2000.

WE would like to sell the rubber for E 100,-

that means we have to sell 20 to cover the costs, and can make our profit on subsequent sales.
While we have about 15 people interested there is no money on the table as yet, so I am a bit hesitant.
Any help, especially promotion from our side would be most appreciated.
Echt snelle auto's vallen stilstaand niet op!

Lancia Thema 8.32 SW

Gebruikersavatar
Maarten-Jan
Site Admin
Berichten: 4561
Lid geworden op: 19 okt 2008, 00:01
Locatie: Zwolle
Contacteer:

Re: Afdichtingsrubber kofferklep 8.32; NU BESTELLEN

Bericht door Maarten-Jan » 30 jul 2011, 08:31

Een update:

Dear 8:32 driver

We are finally making headway with the rubber reproductions.
Please find attached a drawing.

Could you pls. be so kind and comment on the drawing.

the production process will cost € 1800 and we want to make sure that the rubber is correct.

Please also confirm, that you order is still standing.

At some stage we might have to ask you for an order confirmation.

You support in helping to keep this wonderful car on the road is most appreciated.

Yours Sincerely
Felix Furtak B.Eng. (Hons.)
• Lancia Auto SA
http://www.lancia.co.za" onclick="window.open(this.href);return false;

Meld je dus aan bij: sales@lancia.co.za om in de lijst van afnemers te komen. Het lijkt erop dat er nu serieus iets gaat gebeuren!
Bijlagen
seal.JPG
Echt snelle auto's vallen stilstaand niet op!

Lancia Thema 8.32 SW

Gebruikersavatar
Maarten-Jan
Site Admin
Berichten: 4561
Lid geworden op: 19 okt 2008, 00:01
Locatie: Zwolle
Contacteer:

Re: Afdichtingsrubber kofferklep 8.32; NU BESTELLEN

Bericht door Maarten-Jan » 30 mar 2012, 11:57

Dear 8:32 Driver

WE have now received the second prototype and have forwarded it to a driver in Denmark to have it evaluated.

we will let you know as soon as we have the results.


Yours Sincerely
Felix Furtak B.Eng. (Hons.)
• Lancia Auto SA
http://lancia.cc" onclick="window.open(this.href);return false;
Echt snelle auto's vallen stilstaand niet op!

Lancia Thema 8.32 SW

Gebruikersavatar
Maarten-Jan
Site Admin
Berichten: 4561
Lid geworden op: 19 okt 2008, 00:01
Locatie: Zwolle
Contacteer:

Re: Afdichtingsrubber kofferklep 8.32; NU BESTELLEN

Bericht door Maarten-Jan » 06 feb 2014, 10:56

Dear 8:32 Driver

WE have now received the second prototype and have forwarded it to a driver in Denmark to have it evaluated.

we will let you know as soon as we have the results.
Rubber.jpg

Yours Sincerely
Felix Furtak B.Eng. (Hons.)
• Lancia Auto SA
http://lancia.cc" onclick="window.open(this.href);return false;
Echt snelle auto's vallen stilstaand niet op!

Lancia Thema 8.32 SW

Plaats reactie

Terug naar “70 Carrosserie”